Tag

Tag: PPR

  • Intel Post Package Repair (PPR) uses additional spare capacity within the DDR4 DRAM to remap and replace faulty cell areas detected during system boot time. Remapping is permanent and persists through power-down and reboot.
  • Newer memories, such as double data ram version 4 (DDR4) include so-called post-package repair (PPR) capabilities. PPR capabilities enable a compatible memory controller to remap accesses from a faulty row of a memory module to a spare row of the memory module that is not faulty.
    • Hard-PPR permanently remaps accesses from a designated faulty row to a designated spare row. A Hard-PPR row remapping survives power cycles.
    • Soft-PPR remapping temporarily maps accesses from a faulty row to a designated spare row. A Soft-PPR row remapping will survive a “warm” reboot,but does not survive a powercycle.
  • You can enabled it in BIOS policy / Memory RAS configuration – Select PPR type configuration – Hard PPR
UCS

Cisco UCS Manager Plugin for vSphere: Remote Plugin 4.0(0) and 4.0(1) for vCenter 8.0 U2, 8.0 U3 and 9.0

Cisco UCS Manager remote plugin for the vSphere HTML client: 4.0(0) vs 4.0(1), supported vCenter 7.0 U1 to 9.0, appliance sizing, install and Proactive HA.

3 min read
Read more →
UCS

Field Notice: FN – 72368 – Some DIMMs Might Fail Prematurely Due to a Manufacturing Deviation – Hardware Upgrade Available

Cisco Field Notice FN-72368: some DIMMs might fail prematurely due to a manufacturing deviation. What's affected, and why ADDDC and PPR help.

2 min read
Read more →
UCS

ADDDC Sparing and PPR on Cisco UCS M5: BIOS Tokens, Field Notice FN-70432 and Recommended Firmware

ADDDC Sparing and PPR on Cisco UCS M5: how they work, the Memory RAS and PPR Type BIOS tokens, FN-70432 firmware, and handling F1705/F1706 events.

5 min read
Read more →
UCS

ADDDC Virtual Lockstep Hang on Cisco UCS M5 (CSCvr79388, SKX108): Fixed in UCSM 4.1(1c), C480 M5 in 4.1(1d)

UCS M5 servers could hang and reboot (#IERR, M2M timeout) once ADDDC virtual lockstep kicked in. The Cisco bugs, fixed releases and what to run now.

4 min read
Read more →
UCS

Proactive HA is working in VCSA 6.7 with Cisco UCS Manager Plugin for VMware vSphere HTML Client (beta Version 3.0(2))

Proactive HA working on vCenter 6.7 with the Cisco UCS Manager Plugin 3.0(2) beta for the vSphere HTML client, tested on 9 clusters and 290 hosts.

2 min read
Read more →